APS April Meeting 2010
Volume 55, Number 1
Saturday–Tuesday, February 13–16, 2010;
Washington, DC
Session X4: The Laser: Historical Perspectives and Impact on Precision Measurements
10:45 AM–12:33 PM,
Tuesday, February 16, 2010
Room: Thurgood Marshall North
Sponsoring
Units:
FHP GPMFC
Chair: Daniel Kleppner, Massachusetts Institute of Technology
Abstract ID: BAPS.2010.APR.X4.3
Abstract: X4.00003 : Developing Stabilized Lasers, Measuring their Frequencies, demoting the Metre, inventing the Comb, and further consequences
11:57 AM–12:33 PM
Preview Abstract
Abstract
Author:
John L. Hall
(JILA/University of Colorado)
Michelson's 1907 proposal to define the SI Metre in terms of an optical
wavelength was realized only in 1960, based on a $^{86}$Krypton discharge
lamp. The same year saw the cw HeNe laser arrive and a future redefinition
based on laser technology assured. Separation in the late 60's of the
laser's gain and spectral-reference-gas functions led to unprecedented
levels of laser frequency stability and reproducibility. In addition to
HeNe:CH$_{4}$ system at 3392 nm and HeNe:I$_{2}$ at 633 nm, systems at 514
nm and 10600 nm were studied. Absolute frequency measurement became the holy
grail and some NBS team experiences will be shared. We measured both
frequency and wavelength in 1972, and so obtained a speed of light value,
improved 100-fold in accuracy. During the next decade, the NBS value of $c$ was
confirmed by other national labs, and frequency metrology was extended to
the 473 THz (633 nm) Iodine-based wavelength standard. This frequency to
$\sim $10 digit accuracy was obtained in 1983, thus setting the stage for
redefining the SI Metre. By consensus choice the value 299 792 458 m/s was
adopted for the speed of light, effectively reducing the Metre to a derived
SI quantity. Knowledge of the frequency of the particular laser being
utilized was controlled by International intercomparisons, but the need for
a fast and accurate means to make these laser frequency measurements was
obvious. Creative proposals by H\"{a}nsch and by Chebotayev were to use
ultra-fast repetitive pulses to create an ``Optical Comb,'' but it was years
before any technical basis existed to implement their Fourier dreams.
Finally, in 1999 the last needed capability was demonstrated -- continuum
production at 100 MHz rates and non-destructive power levels. By May 2000
phase-locked combs were operational in both Garching and Boulder,
substantially accelerated by their collaborative interactions. Within 18
months all the known proposed ``optical frequency standards'' had been
accurately measured via Comb techniques.
To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2010.APR.X4.3