Bulletin of the American Physical Society
APS March Meeting 2024
Monday–Friday, March 4–8, 2024; Minneapolis & Virtual
Session AA06: V: General Physics I
5:30 AM–7:30 AM,
Monday, March 4, 2024
Room: Virtual Room 06
Sponsoring
Unit:
APS/SPS
Chair: Apurba Paul, University of Notre Dame; Jonte Hance, Newcastle University
Abstract: AA06.00002 : Inkjet printing of sensors for Surface-enhanced Raman spectroscopy*
5:42 AM–5:54 AM
Presenter:
S. A. Sachith Jayanindu
(Department of Physics, University of Colombo)
Authors:
S. A. Sachith Jayanindu
(Department of Physics, University of Colombo)
Darshana L Weerawarne
(Center for Instrument Development, Department of Physics, University of Colombo)
Gimhani C Wickramasinghe
(University of Colombo)
Rangana M Manamendra
(University of Colombo)
Surface-enhanced Raman spectroscopy (SERS) has been an attractive, high molecular selective, and surface-sensitive analytical technique commonly used in detecting trace chemicals. In this regard, SERS sensors with high response is essential to achieve optimal sensing. As such, the study focuses on ink-jet printing of SERS sensors on flexible substrates and optimizing their sensitivity. Silver nanoparticle (JS-B25) dot arrays were printed on flexible substrates, namely A4 paper, PET (polyethylene terephthalate), photo paper, and laminate, utilizing an Epson L130 inkjet printer. The printed arrays were sintered in a thermal oven and subsequently used for Raman detection of Methylene Blue (MB). The substrate type, printing parameters, and sintering temperature were optimized to yield the best SERS sensor. It was determined that the A4 paper exhibited the best results for printing electrodes, yielding the highest Analytical Enhancement Factor (AEF) value of 8 ± 1. Furthermore, the optimum sintering temperature was determined to be 100 ℃. The printing quality settings that yielded the ideal outcomes were "Paper plane" for paper type and "Extra High" for paper quality. Subsequently, an optimized sensor was employed to determine the Limit of Detection (LOD) for MB. The experimental LOD value obtained for MB was found to be 37.93 ppb, and the analytical enhancement factor was calculated as (1.4 ± 0.7) × 103. The results suggest that a regular inkjet printer designed for document printing can be effectively used to fabricate sensors suitable for SERS.
**"This work was carried out with the aid of a grant from UNESCO-TWAS and the Swedish International Development Cooperation Agency (Sida). The views expressed herein do not necessarily represent those of UNESCO-TWAS, Sida or its Board of Governors."
Follow Us |
Engage
Become an APS Member |
My APS
Renew Membership |
Information for |
About APSThe American Physical Society (APS) is a non-profit membership organization working to advance the knowledge of physics. |
© 2024 American Physical Society
| All rights reserved | Terms of Use
| Contact Us
Headquarters
1 Physics Ellipse, College Park, MD 20740-3844
(301) 209-3200
Editorial Office
100 Motor Pkwy, Suite 110, Hauppauge, NY 11788
(631) 591-4000
Office of Public Affairs
529 14th St NW, Suite 1050, Washington, D.C. 20045-2001
(202) 662-8700