APS March Meeting 2011
Volume 56, Number 1
Monday–Friday, March 21–25, 2011;
Dallas, Texas
Session A20: Focus Session: Physics of Energy Storage Materials I -- Cathodes and Electrolytes
8:00 AM–11:00 AM,
Monday, March 21, 2011
Room: D168
Sponsoring
Units:
FIAP/DMP GERA/DCOMP
Chair: Donald J. Siegel, University of Michigan
Abstract ID: BAPS.2011.MAR.A20.4
Abstract: A20.00004 : Materials Challenges and Opportunities of Lithium-ion Batteries for Electrical Energy Storage
8:36 AM–9:12 AM
Preview Abstract
Abstract
Author:
Arumugam Manthiram
(University of Texas at Austin)
Electrical energy storage has emerged as a topic of national and global
importance with respect to establishing a cleaner environment and reducing
the dependence on foreign oil. Batteries are the prime candidates for
electrical energy storage. They are the most viable near-term option for
vehicle applications and the efficient utilization of intermittent energy
sources like solar and wind. Lithium-ion batteries are attractive for these
applications as they offer much higher energy density than other
rechargeable battery systems. However, the adoption of lithium-ion battery
technology for vehicle and stationary storage applications is hampered by
high cost, safety concerns, and limitations in energy, power, and cycle
life, which are in turn linked to severe materials challenges.
This presentation, after providing an overview of the current status, will
focus on the physics and chemistry of new materials that can address these
challenges. Specifically, it will focus on the design and development of (i)
high-capacity, high-voltage layered oxide cathodes, (ii) high-voltage,
high-power spinel oxide cathodes, (iii) high-capacity silicate cathodes, and
(iv) nano-engineered, high-capacity alloy anodes. With high-voltage
cathodes, a critical issue is the instability of the electrolyte in contact
with the highly oxidized cathode surface and the formation of
solid-electrolyte interfacial (SEI) layers that degrade the performance.
Accordingly, surface modification of cathodes with nanostructured materials
and self-surface segregation during the synthesis process to suppress SEI
layer formation and enhance the energy, power, and cycle life will be
emphasized. With the high-capacity alloy anodes, a critical issue is the
huge volume change occurring during the charge-discharge process and the
consequent poor cycle life. Dispersion of the active alloy nanoparticles in
an inactive metal oxide-carbon matrix to mitigate this problem and realize
long cycle life will be presented.
To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2011.MAR.A20.4