2006 48th Annual Meeting of the Division of Plasma Physics
Monday–Friday, October 30–November 3 2006;
Philadelphia, Pennsylvania
Session ZI2: Z Pinches, HED Science, Target Fabrication and Invited Postdeadline
9:30 AM–12:30 PM,
Friday, November 3, 2006
Philadelphia Marriott Downtown
Room: Grand Salon CDE
Chair: Vladimir Sotnikov, University of Nevada
Abstract ID: BAPS.2006.DPP.ZI2.2
Abstract: ZI2.00002 : Deuterium Gas-Puff Z-Pinch Implosions on the Z accelerator
10:00 AM–10:30 AM
Preview Abstract
Abstract
Author:
Christine A. Coverdale
(Sandia National Labs)
The generation of neutrons via current driven sources, including z-pinch
driven hohlraums, deuterium gas puffs, deuterium fiber pinches, deuterium
liners, and dense plasma foci, has been studied for many years. Experiments
with methods other than inertial confinement fusion have produced
significant neutron output (up to $\sim $10$^{12})$ from experiments with
current drives $<$ 8 MA. In this paper, the results of experiments at the Z
Accelerator to study the neutron production and implosion characteristics of
a deuterium gas puff will be presented. Two current levels (12MA and 15MA)
were fielded to evaluate the scaling of the neutron output; neutron outputs
of 1 x 10$^{13}$ and 3 x 10$^{13}$ were measured. The neutron output
measured was the first with a load of this type at this current level and
has been demonstrated to be repeatable, with side-on time-of-flight
measurements showing 2.34 MeV. While the mechanism for the neutrons has not
been identified experimentally, this neutron output is 100 times more than
previously observed from neutron producing experiments at Z. Comparison of
the neutron output with previous experiments at 7 MA shows that the neutron
output scales approximately as I$^{4}$. Time-of-flight measurements from
multiple directions, as well as the results of activation diagnostics will
be presented. The experimental results will be compared with 1D, 2D, and 3D
magneto-hydrodynamic (MHD) calculations, which have shown that thermal
neutron outputs from Z could be expected to be in the (0.3 to 1.0) x
10$^{14}$ range. Dopant gases were added to track the implosion
characteristics of the gas through x-ray yield measurements and
spectroscopy. X-ray diagnostics have shown that the stagnated deuterium
plasma achieved electron temperatures of 2.2 keV and ion densities of 2 x
10$^{20}$ cm$^{-3}$, in agreement with the MHD calculations.
**Sandia is a multi-program laboratory operated by Sandia Corporation, a
Lockheed Martin Company, for the United States Department of Energy under
Contract DE-AC04-94AL85000. NRL work was supported by DTRA.
**in collaboration with C. Deeney, C. Ruiz, Sandia National Labs, G. Cooper,
Univ. of New Mexico, A.L. Velikovich, J. Davis, R.W. Clark, Y.K. Chong, and
J.P. Apruzese, Naval Research Lab, J.Franklin, S. Chantrenne, and P.D.
LePell, Ktech, J. Chittenden, Imperial College, J.Levine and J. Banister,
L-3 Communications.
To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2006.DPP.ZI2.2