2006 48th Annual Meeting of the Division of Plasma Physics
Monday–Friday, October 30–November 3 2006;
Philadelphia, Pennsylvania
Session RI1: Direct Drive ICF
3:00 PM–5:00 PM,
Wednesday, November 1, 2006
Philadelphia Marriott Downtown
Room: Grand Salon ABF
Chair: Stephen Craxton, University of Rochester
Abstract ID: BAPS.2006.DPP.RI1.3
Abstract: RI1.00003 : 1-MJ, Wetted-Foam Target-Design Performance for the NIF
4:00 PM–4:30 PM
Preview Abstract
Abstract
Author:
T.J.B. Collins
(Laboratory for Laser Energetics, U. of Rochester)
Wetted-foam, direct-drive target designs are a path to high-gain
experiments
on the National Ignition Facility (NIF). Wetted-foam
designs\footnote{ S.
Skupsky \textit{et al}., in \textit{Inertial Fusion Sciences and
Applications 2001}, edited by K. Tanaka, D. D. Meyerhofer, and J.
Meyer-ter-Vehn
(Elsevier, Paris, 2002), p. 240.}$^{,}$\footnote{ D. G. Colombant
\textit{et al}., Phys.
Plasmas \textbf{7}, 2046 (2000).} take advantage of the increased
laser
absorption provided by the higher-atomic-number elements in the
mixture of
plastic foam and deuterium--tritium (DT). The fractional
absorption is
expected to increase by as much as 30{\%} relative to an ``all-DT''
target\footnote{ P. W. McKenty\textit{ et al}., Phys. Plasmas
\textbf{8}, 2315 (2001).} for
a $\sim $1-MJ design, depending on the density of the foam and
the specific
target design. With the increased laser coupling, more fuel can
be driven
with the same incident laser energy, resulting in increased
target gain
and/or increased hydrodynamic stability. A stability analysis of
a 1-MJ
design performed using two-dimensional hydrodynamic simulations
in the
presence of expected levels of laser and target nonuniformities
will be
shown. For this design, the sources of nonuniformity from the
laser include
power imbalance between laser beams and the imprint of single-beam
nonuniformities on the target. Target nonuniformities include
surface finish
and inner-surface DT-ice roughness. The relative impact of these
sources of
nonuniformity on target performance will be examined. Particular
emphasis
will be placed on identifying the required levels of beam
smoothing with
regard to smoothing by spectral dispersion. While this emphasizes
symmetric
illumination, the results are relevant to polar direct drive,
where a
direct-drive target is driven on the NIF while it is in its
indirect-drive
configuration.\footnote{ S. Skupsky \textit{et al}., Phys.
Plasmas \textbf{11}, 2763
(2004).} This work was supported by U. S. Department of Energy
Office of
Inertial Confinement Fusion under Cooperative Agreement No.
DE-FC52-92SF19460. Contributors: S. Skupsky, R. Betti, P. W.
McKenty, P. B.
Radha, V. N. Goncharov, D. R. Harding, J. P. Knauer, J. A.
Marozas, R. L.
McCrory, UR/LLE.
To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2006.DPP.RI1.3