### Session Q20: Invited Session: Robust Energy Storage with Engineered Si

11:15 AM–2:15 PM, Wednesday, February 29, 2012
Room: 253C

Sponsoring Unit: FIAP
Chair: Susan Babinec, A123 Systems

Abstract ID: BAPS.2012.MAR.Q20.2

### Abstract: Q20.00002 : Strain-tolerant High Capacity Silicon Anodes via Directed Lithium Ion Transport for High Energy Density Lithium-ion Batteries

11:51 AM–12:27 PM

Preview Abstract MathJax On | Off   Abstract

#### Author:

Jason Goldman
(University of Illinois at Urbana Champaign)

Energy storage is an essential component of modern technology, with applications including public infrastructure, transportation systems, and consumer electronics. Lithium-ion batteries are the preeminent form of energy storage when high energy / moderate power densities are required. Improvements to lithium-ion battery energy / power density through the adoption of silicon anodes--with approximately an order of magnitude greater gravimetric capacity than traditional carbon-based anodes--have been limited by $\sim$300\% strains during electrochemical lithium insertion which result in short operational lifetimes. In two different systems we demonstrated improvements to silicon-based anode performance via directed lithium ion transport. The first system demonstrated a crystallographic-dependent anisotropic electrochemical lithium insertion in single-crystalline silicon anode microstructures. Exploiting this anisotropy, we highlight model silicon anode architectures that limit the maximum strain during electrochemical lithium insertion. This self-strain-limiting is a result of selecting a specific microstructure design such that during lithiation the anisotropic evolution of strain, above a given threshold, blocks further lithium intercalation. Exemplary design rules have achieved self-strain-limited charging capacities ranging from 677 mAhg$^{-1}$ to 2833 mAhg$^{-1}$. A second system with variably encapsulated silicon-based anodes demonstrated greater than 98\% of their initial capacity after 130+ cycles. This anode also can operate stably at high energy/power densities. A lithium-ion battery with this anode was able to continuously (dis)charge in 10 minutes, corresponding to a power / energy density of $\sim$1460 W/kg and $\sim$243 Wh/kg--up to 780\% greater power density and 220\% higher energy density than conventional lithium-ion batteries. Anodes were also demonstrated with areal capacities of 12.7 mAh/cm$^2$, two orders of magnitude greater than traditional thin-film silicon anodes.\\[4pt] In collaboration with Michael W. Cason and Ralph G. Nuzzo.

To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2012.MAR.Q20.2