Session WF1: Plasma Diagnostics II
10:00 AM–12:00 PM, Friday, October 17, 2008
Room: Salon E
Chair: M. Goeckner, The University of Texas at Dallas
Abstract ID: BAPS.2008.GEC.WF1.6
Abstract: WF1.00006 : A direct measurement of the energy flux density in plasma surface interaction
11:15 AM–11:30 AM
Preview Abstract
MathJax On | Off 
Abstract 
Authors:
Remi Dussart
(GREMI)
Anne-Lise Thomann
(GREMI)
Nadjib Semmar
(GREMI)
Laurianne Pichon
(GREMI)
Larbi Bedra
(GREMI)
Jacky Mathias
(GREMI)
Yves Tessier
(GREMI)
Philippe Lefaucheux
(GREMI)
The energy flux transferred from a plasma to a surface is a key issue for materials processing (sputtering, etching{\ldots}). We present direct measurements made with a Heat Flux Microsensor (HFM) in an Ar plasma interacting with the surface of the sensor. The HFM is a thermopile of about one thousand metal couples mounted in parallel. An Inductively Coupled Plasma in Argon was used to make the experiments. Langmuir probe and tuneable laser diode absorption measurements were carried out to estimate the contribution of ions, neutrals (conduction) and metastables. In order to evaluate the ability of the HFM to measure the part due to chemical reactions, a Si surface in contact with the HFM was submitted to an SF$_{6}$ plasma. The direct measurements are in good agreement with the estimation we made knowing the etch rate and the enthalpy of the reaction. Finally, tests were performed on a sputtering reactor. Additional energy flux provided by condensing atoms (Pt) was also measured.
To cite this abstract, use the following reference: http://meetings.aps.org/link/BAPS.2008.GEC.WF1.6